School Registration and Fees Payment System Essay examples

Words: 30207
Pages: 121

Development and Assessment of Well Control Procedures for Extended Reach and Multilateral Wells Utilizing Computer Simulation by Dr. Jerome J. Schubert, Texas A&M University Dr. Jonggeun Choe, Seoul National University, Korea Mr. Bjorn Gjorv, Texas A&M University Mr. Max Long, Texas A&M University

Final Project Report Prepared for the Minerals Management Service Under the MMS/OTRC Cooperative Research Agreement 1435-01-99-CA-31003 Task Order 85222 Project Number 440

December 2004

OTRC Library Number: 12/04-A146

“The views and conclusions contained in this document are those of the authors and should not be interpreted as representing the opinions or policies of the U.S. Government. Mention of trade names or commercial

3. This dual kill rate would require that a kill rate pressure be taken at more than one rate, and the kill sheet should reflect these kill rate/kill rate pressure combinations. A thorough explanation can be found in Parts II and III.

Contacts: Dr. Jerome J. Schubert Department of Petroleum Engineering Texas A&M University, M.S. 3116 College Station, TX 77843-3116 979/862-1195, jschubert@.tamu.edu fax 979/845-1307 Dr. Jonggeun Choe Seoul National University School of Civil and Geosystems Engineering Seoul 151-742, Korea (822)880-8081, jchoe@geofluid.snu.ac.kr fax (82-2)871-8938

Part I Modifications to an Existing Windows-Based Well Control Simulator to Model Extended Reach and Multilateral Wells by Dr. Jonggeun Choe, Seoul National University As summarized in this report, Task 2 the scope of work has been completed. We have completed the following: -Modify and update an existing conventional simulator using Visual Basic v.6.0 -Modify the simulator to model extended reach wells -Take into account gas compressibility factor on casing pressure and drill pipe pressure -Take into account compressibility of mud and formation on well stabilization -Modify the simulator to handle multilateral wells -Use the simulator to evaluate and compare current and new procedures, if any, from this study -Develop a Windows-based well control program with the following capabilities: • Ability to modify, save, and retrieve input data