Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption
!
hostname Router
!
boot-start-marker boot-end-marker ! enable secret 5 $1$0QLn$E.nccvU4NqgYZynW6FS3C0 enable password cisco
!
no aaa new-model
!
resource policy
!
memory-size iomem 15 ip subnet-zero
!
! ip cef
!
!
!
! voice-card 0 no dspfarm
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
! interface FastEthernet0/0 ip address 10.0.1.1 255.255.255.0 duplex half speed auto no mop enabled
!
interface FastEthernet0/1 ip address 10.0.2.1 255.255.255.0 duplex half speed auto no mop enabled
!
interface Serial0/0/0 no ip address shutdown ! ip classless
!
! ip http server no ip http secure-server
!
dialer-list 1 protocol ip permit
!
!
!
! control-plane !
!
!
!
!
!
!
!
!
!
line con 0 line aux 0 line vty 0 4 password cyberus login ! scheduler allocate 20000 1000
!
end

*** Log Session ***

router>enable
Password:
router#erase startup-config
Erasing the nvram filesystem will remove all configuration files! Continue? [confirm]
[OK]
Erase of nvram: complete router# 01:26:04: %SYS-7-NV_BLOCK_INIT: Initialized the geometry of nvramreload

System configuration has been modified. Save? [yes/no]: n
Proceed with reload? [confirm]

01:26:42: %SYS-5-RELOAD: Reload requested by console. Reload Reason: Reload command.

System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.

Initializing memory for ECC
.
c2811 platform with 262144 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC enabled

Upgrade ROMMON initialized program load complete, entry point: 0x8000f000, size: 0xcb80 program load complete, entry point: 0x8000f000, size: 0xcb80

program load complete, entry point: 0x8000f000, size: 0x1eba660
Self decompressing the image : ########################################################################################################################################################################################################################################################################################################################################################## [OK]

Smart Init is disabled. IOMEM set to: 15

Using iomem percentage: 15

Restricted Rights Legend

Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706

Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4(3g), RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 06-Nov-06 02:36 by alnguyen
Image text-base: 0x400A1994, data-base: 0x42D00000

Port Statistics for unclassified packets is not turned on.

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. Cisco 2811