NVQ Level 3 Site Carpentry (QUA902)
Knowledge Question requirements
Candidate Name
QCF641: 1:4, (09B, 10B, 628, 11V2 and 25V2 3:2)
State why and when health and safety control equipment, identified by the principles of protection, should be used relating to types, purpose and limitations of each type, the work situation, occupational use and the general work environment, in relation to:
Collective protective measures
Personal protective measures (PPE)
Respiratory protective equipment (RPE)
Local exhaust ventilation (LVE).
QCF641: 1:5, (09B, 10B, 628, 11V2 and 25V2 3:3)
State and/or describe how the health and safety control equipment relevant to the work should be used in accordance with the given instructions.
QCF641: 1:6 and 1:7
State which types and how to comply with, health, safety and welfare legislation, notices and warning signs that are relevant to the occupational area.
1:8
State how to comply with control measures that have been identified by risk assessments and safe systems of work.
2:2
List typical hazards associated with the work environment and occupational area in relation to resources, substances, asbestos, equipment, obstructions, storage, services and work activities.
2:5
State how changing circumstances within the workplace could cause hazards.
2:6
State the methods used for reporting changed circumstances, hazards and instances in the work place.
3:6
State the organisational policies and procedures for health, safety and welfare, in relation to:
Dealing with accidents and emergencies associated with the work and environment
Methods of receiving or sourcing information
Reporting
Stopping work
Evacuation
Fire risks and safe exits procedures
Consultation and feedback
QCF641: 3:7and 3:8, (09B, 10B, 628, 11V2 and 25V2 2:4)
State the different types of fire extinguishers available and describe how
Related Documents: Personal Protective Equipment Essay
the work environment clean and tidy and to maintain good personal hygiene. 1.2 Employers responsibilities in the relation to the prevention and control of infection are to keep everybody safe and to provide a safe work place, they do this by following current legislation. Produce relevant risk assessments in order to reduce or eliminate infection risks, provide relevant training for employees as well as PPE (personal protective equipment), up to date policies and procedures, cleaning products and…
substances are called respiratory sensitisers, and it is important that you are able to recognise the symptoms and prevent or control exposure. View the link for guidance. 5. Anyone using hazardous substances may have to wear some form of personal protective equipment (PPE) and / or barrier cream; however, other measures must be considered and implemented first, to remove or minimise the risk. If selected, used and maintained correctly, PPE can help protect the worker from contact with harmful substances…
gov/SLTC/etools/safetyhealth/comp3.html Regularly and thoroughly maintain equipment Ensure that hazard correction procedures are in place Ensure that everyone knows how to use and maintain personal protective equipment Make sure that everyone understands and follows safe work procedures Ensure that, when needed, there is a medical program tailored to your facility to help prevent workplace hazards and exposures Engineering Controls If feasible, design the facility, equipment, or process to remove the hazard or substitute…
Regulations 1992 Reporting of Injuries, Diseases and Dangerous Occurrences Regulations 1995(RIDDOR) Control of Substances Hazardous to Health Regulations 2002 (COSHH) Provision and use of work equipment 1992 (PUWER) Lifting operation and lifting equipment regulations 1992 Personal Protective Equipment at work regulations (PPE) 1.2 Main points of Health and Safety policies and procedures: Recognise the risks when people are working Control measures to keep risks to minimum as possible…
Reporting of injuries, diseases and dangerous occurrences regulations (RIDDOR) and Personal protective equipment (PPE). Effective hand washing and wearing the correct PPE when assisting clients or dealing with waste which will reduce the spread of infection. We have a hand washing champion who does regular audits on our hand washing techniques to ensure we are doing it correctly. To ensure we clean equipment correctly to avoid spread of infection. Clinical waste goes into a yellow bag. Barrier…
organisational personal and moral responsibilities. Employers have a responsibility to Ensure policies are in place and are accessible to employers Assess risks in relation to to the prevention and control of infection Communicate risks with employees Provide equipment which is safe and appropriately maintained Ensure safety procedures are followed Ensure employees have adequate information ,training and supervision Provide and maintain any necessary personal protective equipment PPE Keep records…
Company Identification 2. Compositions/ Information on Ingredients 3. Hazards Identifications 4. First Aid Measures 5. Fire Fighting Measures 6. Accidental Release Measures 7. Handling and Storage 8. Exposure Controls/ Personal Protection 9. Physical and Chemical Properties 10. Stability and Reactivity 11. Toxicological Information 12. Ecological Information 13. Disposal Considerations 14. Transport Information 15. Regulatory Information…
volunteers, students, Medical Staff of UNC Hospitals, School of Medicine, and research personnel utilizing UNC Health Care facilities. Neatness and cleanliness are evidence of concern for our patients, their families the public, and each other. Personal neatness and appropriate attire provide an atmosphere of professionalism and inspire confidence in our ability to deliver services. The provisions of this policy apply to all personnel operating in UNC Health Care. Employees arriving at work and…
safety is always an important skill to have in a lab setting, especially when we are working independently without guidance. 2. Objectives The objectives of this lab were to work with microorganisms in the safe proper way, use the correct experiment equipment and use it in the correct way, and follow instructions to protect us in lab setting. 3. Methods and Materials Yeast packet (1) 250 mL beaker Measuring spoon 1 tsp. sugar Nutrient agar (4) 5 cm. Petri dishes 20 drops deionized water (4) Sterile transfer…
severity of the top five hazards? Answer: I would suggest that LearnInMotion develop a Safety and Health Program that covers employees and employer. Begin by conducting a safety and health survey. The survey should cover the use and maintenance of Equipment, Work Practices, and OSHA Standards. The five top hazards that I…