Wireless Photoelectric Smoke and Heat Detector by Gau B. Gauseu
March 15, 2012

Ademco’s powerful LST is a combination wireless photoelectric smoke and heat detector that trips when temperatures reach 135º F. Ideal for difficult to wire locations, situations where room aesthetics are critical, or where hazardous materials exist, the LST provides the ultimate in installation flexibility. (Ademco 1) Remarkably cost-effective, the attractive, low profile unit blends easily with any décor and provides benefits rarely found in smoke detectors in this price range. Smart Check remote maintenance reporting automatically alerts the central station when it is in need of service, and built-in drift compensation continuously corrects sensitivity variances caused by dust.

The LST is UL 268 listed for use in both commercial and residential applications. All trademarks are property of their respective owners. Mounting Instructions. First, determine the best location for the smoke detector that provides strong wireless transmission paths and proper smoke detection. A good transmission path must be established from the proposed mounting location before permanently installing the detector. To mount the detector, install the mounting bracket on the ceiling or on the wall (if local ordinances permit). Use the two screws and anchors provided. Prior to mounting the detector to the mounting bracket, the system must “enroll” the detector’s ID. Turn the detector in a clockwise direction in the mounting bracket until it clicks into place. Test the detector immediately after completing the installation and refer to the control system’s instructions for additional information concerning the use of wireless smoke detectors.

Electrical, two-volt CR123A lithium batteries (included). Replace with Duracell DL123A, Sanyo CR123A, Panasonic CR123A, ADEMCO 466, or Varta CR123. (Ademco 2) Hot sensitivity, 0.65% + 0.15% per foot. Cold sensitivity, less than 6% per foot. Size.,2.5 inches (14 cm) by 5.5 inches (64 mm) by 0.7 lb. (310 g) with 4.4° to 37.8°C (40° to 100°F) and 5% to 95% relative humidity with 135°F fixed temperature electronic thermistors. Now, 45°F fixed temperature electronic thermistors are agency listings, UL 268. Commercial and Residential Passive Infrared Motion Detector with its new EZ-Mount features.

The 996/998 motion detector family is now the easiest and fastest detector to install. And there’s no change to the superior and proven performance that’s always been a part of this leading motion detector. Easy mounting for those who install it and easy minds for those it protects. A another winning combination with the ASC Edge, EZ-Mount installation features, including ample space for wiring. Mount without PCB removal. DIP Switch replaces easily dropped or lost jumper links. Important instructions printed next to selectable options. Covered electronics prevents accidental damage to circuitry. Superior LED viewing through computer-designed light guide. Streamlined styling. Horizontal and vertical pattern adjustment. Pet alley and long range lenses included with 998 and optional with 996, 99PA and 99LR. Optional 998SB swivel bracket available.

Protection Patterns. Specifications, 996/998, detection method. Passive infrared coverage, standard wide angle lens, 50' x 50' (15m x 15m), 90°. Long range lens, 100' x 10' (30m x 3m). Pet alley lens, 50' x 70' (15m x 21m), 100°. Detection pattern standard lens,