Kwik Sew Pattern 3940

First Front Model A and B
Second Back Model A and B
Third Front raglan Models A and B
4th Rear raglan Models A and B
5th Front armholes document types A and B
6th Rear armholes document types A and B
7th Case Model A
8th Pocket Panel Model A

To cut parts 1 8: A model for
To cut parts 1 6: for model B

How to use Kwik-Sew More size cuts
For best results, please first read the ENTIRE manual.
The pattern includes five sizes, colors that are different to better distinguish each tagged. The section was created for different dimensions, with different Wide additions for comfort and style. Compare your measurements with the on the back the envelope indicated and select the size that is most like you. Select the cut-out parts that are needed for the selected model. The pattern sheet with a normal iron (do not use a steam iron!) smooth. Cut out the pattern pieces, you are following the color-coded lines and the model lines of your model. Check the correct length and run on necessary changes the paper parts before you cut.
Cut out
Wash before the substance, if necessary. The fabric right sides together, fold unless it is average expressly requests otherwise. Paper cut parts placed on the left side of the fabric, tell you how to set the crop index. When pattern pieces cut ply be, the right side of the fabric facing up. Any change you make to the pattern, the situation can change your pattern pieces. Use in these cases the Trim Overview only as a guideline. The crop index goes from smooth, unstructured and monochrome Substances. Align the cut-out parts always so that the yarn-arrows in the same Direction running. Replace the cuts so that the drawn yarn to parallel Stoffbruch runs, and the maximum elongation direction of the substance is observed. Fix the Cut parts with weights or needles. Cut the cut with scissors or Rotary cutter to. Before you remove the paper pattern pieces on the fabric pieces, please transfer Pass all characters, periods and running lines with chalk or water soluble pen. Pass sign Starting points, front and back middle are easiest with small snapping the fabric transfer please, only in the seam allowances. Label the pattern pieces on the left side with recordable tape.
Crop legend ("layout code")
Gray right sides do wrong side pink paper cut with the printed side up dark pink paper cut with the face down
Crop Summary
Important Words:
• All Sizes = all sizes
• armhole = armhole
• Seam tape = yoke seam / seam panels
• Bottom = bottom
• Bottom edge = bottom, hem
• Center back = back middle
• Center Front Seam = front center seam
• Center front = mid front
• Cutting Line For Interfacing = cutting edge for deposit
• Extension = underlap
• Facing = document
• Fold = Stoffbruch
• Fold = Line break
• Gather = curling
• Grain of Fabric = yarn
• Allowed = Hem hem allowances cut • Or Lengthwise Crosswise Grain Of Fabric
= Yarn or transversely • Pocket Placement = bag approach
• Selvages = fabric edges / selvages
• Shorten or Lengthen Line = shorten here or extend
• Shoulder = Shoulder
• Side = side
• Side Seam = side seam
Of contrast material (Contrast) according to plan:
Model A (View A):
Cut part 3 (Front Passe) - 2x in Stoffbruch
Cutting part (Rear yoke) 4 - 4x
Cutting part (pocket panel) 8 - 2x
Of fabric (fabric) of plan:
Model A (View A):
Cut Part 1 (front) - 1x in Stoffbruch
Cut Part 2 (back) - 2x
Cut Part 5 (Front armholes document) - 2x
Cut Part 6 (Rear armholes document) - 2x
Cutting part (bag) 7 - 2
Model B (View B):
Cut Part 1 (front) - 1x in Stoffbruch
Cut Part 2 (back) - 2x
Cut part 3 (Front Passe) - 2x in Stoffbruch
Cutting part (Rear yoke) 4 - 4x
Cut Part 5 (Front armholes document) - 2x
Cut Part 6 (Rear armholes document) - 2x
Of deposit (interfacing) of plan:
A & B (View A & B):
Cut Part 2 (back) - 2x
Cut part 3 (Front Passe) - 2x in Stoffbruch
Cutting part (Rear yoke) 4 - 2x
Cut Part 5 (Front armholes document) -