It is important to ensure that if you are working directly with people requiring support, you understand the principles of the prevention and control of infection.
Add numbers in the left-hand column of the table below to put the hand-washing technique in the correct sequence.
Number
Direction
3
Wet both hands.
2
Select the correct water temperature, as it needs to be comfortable enough for you to place your hands underneath without having to withdraw them because it is too hot or too cold.
4
Apply a full measure of hand-wash solution, but not too much, and rub the palms of the hands together.
1
Remove watches and rings.
6
Rub one hand over the back of the other, remembering to rub in the spaces between the fingers.
5
Interlock the thumbs, ensuring that the thumbs and the wrists have contact with the hand-wash solution.
7
Rub the fingertips in a circular motion against the palm of the opposite hand and then swap. If a wedding ring is being worn, pay attention to this area and ensure you wash under the ring.
8
Rub the fingertips together to clean the tips, the back and the front of the fingers.
9
Once all the surfaces of the hands have been washed, ensure the hands are thoroughly rinsed to remove any soap residue, as this can make the skin sore and dry.
11
Thoroughly dry the hands on absorbent disposable paper towel. Do not use hot air driers, as these blow bacteria back on to the hands and damp communal towels can lead to cross-infection.
10
Turn taps off using the elbows